Reset Blue Pak - 6g

6 GRAMS (6) 1g Blue CLO₂ Tablets
* CLO₂ LIQUID ONLY.

ClO₂ to quickly neutralize pungent and resistant odors caused by musty dampness, pets, smoke, garbage, urine and vomit.

Use 6 grams of ClO₂ for:

• Liquid Solution: Makes 1.5 gallons (100ppm)

Notes:
(1) This product is not recommended for vaporing.

ClO₂ Gas Activation

1) Preparation
Create and/or seal treatment area so that it is a ‘confined space’ without direct sunlight, i.e., close windows/doors/shades etc. Disconnect confined space smoke alarms for treatment period. Put Warning/Do Not enter signs on doors to the ‘confined space’.

Determine size of space to be treated and severity of issues. Odor types and environments vary significantly and must be evaluated on a case by case basis. Select proper Reset product size for intended usage. Remove people, plants and pets from the ‘confined space’ during treatment period. Furniture and room contents must be dry (not damp) and will not be harmed by gas treatment. Place Reset ClO₂ and its container in center of space or if possible, next to the HVAC return with the system fan ‘on’ for the entire gas treatment period.

2) Gas Product Activation
Note: Gas concentrate will stain if spilled.
Warning: Never put your nose directly over the gas container while handling. Always wear appropriate P100 respirator mask, goggles and gloves as advised on the SDS and First Aid section of this label. All contents must be dry during gas applications or fading could occur.

Gas Application Treatment Time: 1 hour minimum. 12 to 24 hours is best. Use multiple Tablets and Paks, buckets and containers for large fragmented spaces.

(a) Select appropriate size Reset product and generation container.
(b) Add appropriate amount of water to the container. Then add a simple aquarium-type or Reset aerator to the side of the container, insert its tube and stone into the ClO₂ solution and turn it on.
(c) Add Reset Tablets/Paks to the container and immediately evacuate the room.

Red 20g Tablets: Add 5 oz tap water per ClO₂ Tablet into a 24 oz disposable plastic cup. No more than 2 Tablets per 24 oz cup, or use Reset Kit containers. Add the Tablets to cup and water, then insert and turn on the aerator and immediately evacuate the confined space.

3) Always air-out the ‘confined space’ before re-entering and re-occupying. If you smell a ‘chlorine’ smell, continue to air-out space.

4) Dispose of the remaining ClO₂ down the toilet/drain.

ClO₂ Liquid Generation

Simply add Reset TABLETS to water and any universal sized container to generate your desired concentration. The product works as it dries, so surfaces and atmospheres only need to be lightly wetted for ClO₂ to be effective.

1) Preparation
Always clean off any visible dirt and organic matter before treating the desired surface or material.

2) Liquid Product Activation
Fill desired and corresponding opaque container with tap water. Drop the appropriate Reset Tablet into the water to generate the solution per product instructions. Put cap on container. Wait 3 minutes for the product to mix and generate properly.

3) Liquid Application Treatment
Apply directly to the atmosphere, surfaces, clothing, uniforms, furniture, upholstery and materials requiring treatment. Use on targeted porous and non-porous surfaces with a mop, sponge, pump sprayer or non-thermal fogger.

DO NOT WIPE. LET DRY. DO NOT RINSE.
Always test material compatibility with ClO₂. Never purposefully inhale the chlorine dioxide chemical. Always wear personal protection equipment per SDS.

MATERIALS: Reset ClO₂ application usage solutions are compatible with tile, marble, stone, steel, plastics, rubber, vinyl, fabrics and wood. Always test the product in a small non visible section to ensure that there are no unintended consequences due to the particulars of your environment or material.