Using Reset in a Brewery
ClO₂ is used globally in a wide variety of standard usage applications including breweries.
Brewery: process equipment, tanks & lines.
ClO₂ features: No Rinsing or Wiping Required, Non-Masking, Non-Staining, Non-Corrosive, No Fragrances, No VOCs, Near Neutral pH, No Enzymes.
US Brewery Industry (Active) Chlorine Dioxide Standard Protocols:
- Liquid: 0.5ppm to 500ppm on porous & non-porous surfaces
- Tank & Line: 50ppm to 500ppm
Proven safe on brewing & process equipment, steel, plastic, flooring.
Reset Impacted Surfaces with ClO₂ Liquid
Simply add pre-measured, color coded Reset ClO₂ Tablets to water and any universal-size opaque container or dispersion tool to generate desired concentration or application requirement.
Apply Reset liquid into the atmosphere and onto all porous and non-porous surfaces with a mop, sponge, pump sprayer or non-thermal fogger.
Reset Environment & Its Contents with ClO₂ Gas
3 to 24 hours treatment time depending on severity of issue
Create a confined space. Follow Reset Gas activation instructions.
Open hatches to air-out ClO₂ from the confined space before reoccupying.
Reset Tanks & Lines
Only ClO₂ neutralizes bio-fouling in ‘head spaces’ and within transfer lines
Use pre-sized Reset Tablets. See Tank & Line chart below.
| Tank & Line Generation Table | |
| Total Tank Capacity | Reset Tablet Required |
| 5-10 Gallon | 1 Green Tablet |
| 10-20 Gallon | 2 Green Tablets |
| 55 Gallon | 1 Red Tablet |
| 110 Gallon | 2 Red Tablets |
| 240 Gallon | 4 Red Tablets |